Alstom TRAXX F160 MS3 188 # 011 of the akiem is pulling the BLS Cargo transfer train 97549 from Solothurn to Romanshorn between Winterthur and Oberwinterthur, with 3 standard cars type IV of the S... (more)
After completing interference current measurements on the 25kV track between Basel St. Johann and Basel SBB, the locomotive is on its way back to Spiez.
After another lift measurement run for the pantograph, the locomotive must wait to enter the station Sulgen.
Pictured betwenn Märstetten and Weinfelden while on transfer to Romanshorn for another testset between Romanshorn and Sulgen.
The ALSTOM TRAXX F160 MS3 188 # 011 of the Akiem leasing company, registered with D-BTH, is on a pantograph test run 97653 from Sulgen to Romanshorn Seewiesen, between Erlen and Oberaach. The test... (more)
Pantograph test runs on the Thur Valley line with the Alstom TRAXX F160 MS3 188 # 011 from Akiem Leasing Company, operated by BLS Cargo. The locomotive for all four European power systems, with 60... (more)
The loco will perform test runs on several days between Solothurn and Grenchen Süd, for tests of the interaction pantograph overhead contact line with speeds up to 154 km/h. This test runs for th... (more)
Test train of the Deutsche Bahn with Bombardier TRAXX F140 MS3 188 # 006 in the rear, between Dättwil and Mellingen. The train circulated several times between Wettingen/ Baden Oberstadt and Mell... (more)
New multi system testbed or demonstration locomotive of Bombardier Transportation, TRAXX F140 MS3 188 # 006, on an adhesion test run with about 1000 tons on the 2.7 % grade of the Lötschberg moun... (more)
Adhesion test run on the Lötschberg mountain route on 2.7 % gradient above Frutigen with the brand-new Bombardier TRAXX F140 MS3 188 # 006, in view of a new acquisition of locomotives for BLS Car... (more)
