Starting the night vehicle parade on the Luogelkin viaduct is this maintenance of way train, with Tm 235 "Robel", 3 ballast car and a small diesel locomotive Tm 235 095-098, all in the BLS paint s... (more)

CSXT 8514 sits with spreader C&O 914055 in the Ronceverte Yard. Interesting how the spreader still has C&O on the side.

I finally decided to go see CSX's Sand Patch and when I see this coming I know it is going to be a slow day. A Shuttlewagon pushing two flatcars with lights and a cherry picker on them for tunnel ... (more)

A Loram rail grinder fresh out of the factory just down the line in Hamel, MN gleams in the morning sun on the siding at Brooten. It's waiting for a crew from Loram to arrive and begin testing be... (more)

Cooling off the roadbed after a heavy grind...

Work is conducted on a slip switch as two yard moves are made simultaneously. WT is a busy place.

Work crews unload the first of 3 panel switches to be used as replacements in Kenwood Yard. The switches had been salvaged from unused sidings on the North End of the D&H.

This is rare to say the least. A Brandt Hi-Rail truck brings three IC ballast hoppers eastbound into the USRC.

A freshly painted H3 SD60M heads up BNSF's P-811 concrete tie machine as it slowly crawls around the curve between Warner Siding and Orion. By the time the rear of the train clears, the wood ties... (more)

CP SD40-2 #6077 leads a weed spraying consist eastbound at Rosedale.

Pacing the LORAM Rail Grinder train at about 15 mph as it produces lots of sparks and smoke along the Florida East Coast Railway.

Sparks fly as the LORAM Rail Grinder train slowly works south on the Florida East Coast Railway main line.

Crewman on the LORAM Rail Grinder train checks the connections between the two water cars as the train works south on the Florida East Coast Railway towards Miami.

After a long day of testing rail, the CN Track Evaluation RDC Budd car is tied down and resting for the night in the yard at Virginia along the CN Rainy Sub.